Publications
Some of the current members of the research group "Thermodynamic Modeling and Analysis of Phase Transitions" were members of a former group or of RG 1 respectively. Therefore, the corresponding publications can found on the web pages of these groups:
 former Young Scientists' Group "Modeling of Damage Processes"
 former Leibniz Group "Mathematical Models for LithiumIon Batteries"
 Research group 1 "Partial Differential Equations"

M. Landstorfer, Mathematische Modellierung elektrokatalytischer Zellen, Mitteilungen der Deutschen MathematikerVereinigung, 26 (2019), pp. 161163.

D. Peschka, S. Haefner, L. Marquant, K. Jacobs, A. Münch, B. Wagner, Signatures of slip in dewetting polymer films, Proceedings of the National Academy of Sciences of the United States of America, 116 (2019), pp. 92759284, DOI 10.1073/pnas.1820487116 .

P. Vágner, C. Guhlke, V. Miloš, R. Müller, J. Fuhrmann, A continuum model for yttriastabilised zirconia incorporating triple phase boundary, lattice structure and immobile oxide ions, Journal of Solid State Electrochemistry, 23 (2019), pp. 29072926, DOI 10.1007/s10008019043569 .
Abstract
A continuum model for yttriastabilised zirconia (YSZ) in the framework of nonequilibrium thermodynamics is developed. Particular attention is given to i) modeling of the YSZmetalgas triple phase boundary, ii) incorporation of the lattice structure and immobile oxide ions within the free energy model and iii) surface reactions. A finite volume discretization method based on modified ScharfetterGummel fluxes is derived in order to perform numerical simulations.
The model is used to study the impact of yttria and immobile oxide ions on the structure of the charged boundary layer and the double layer capacitance. Cyclic voltammograms of an airhalf cell are simulated to study the effect of parameter variations on surface reactions, adsorption and anion diffusion. 
P. Nestler, N. Schlömer, O. Klein, J. Sprekels, F. Tröltzsch, Optimal control of semiconductor melts by traveling magnetic fields, Vietnam Journal of Mathematics, published online on 02.08.2019, DOI 10.1007/s10013019003555 .
Abstract
In this paper, the optimal control of traveling magnetic fields in a process of crystal growth from the melt of semiconductor materials is considered. As controls, the phase shifts of the voltage in the coils of a heatermagnet module are employed to generate Lorentz forces for stirring the crystal melt in an optimal way. By the use of a new industrial heatermagnet module, the Lorentz forces have a stronger impact on the melt than in earlier technologies. It is known from experiments that during the growth process temperature oscillations with respect to time occur in the neighborhood of the solidliquid interface. These oscillations may strongly influence the quality of the growing single crystal. As it seems to be impossible to suppress them completely, the main goal of optimization has to be less ambitious, namely, one tries to achieve oscillations that have a small amplitude and a frequency which is sufficiently high such that the solidliquid interface does not have enough time to react to the oscillations. In our approach, we control the oscillations at a finite number of selected points in the neighborhood of the solidification front. The system dynamics is modeled by a coupled system of partial differential equations that account for instationary heat condution, turbulent melt flow, and magnetic field. We report on numerical methods for solving this system and for the optimization of the whole process. Different objective functionals are tested to reach the goal of optimization. 
W. Dreyer, C. Guhlke, R. Müller, The impact of solvation and dissociation on the transport parameters of liquid electrolytes: Continuum modeling and numerical study, European Physical Journal Special Topics, 227 (2019), pp. 25152538, DOI 10.1140/epjst/e20198001332 .
Abstract
Electrothermodynamics provides a consistent framework to derive continuum models for electrochemical systems. For the application to a specific experimental system, the general model must be equipped with two additional ingredients: a free energy model to calculate the chemical potentials and a kinetic model for the kinetic coefficients. Suitable free energy models for liquid electrolytes incorporating ionsolvent interaction, finite ion sizes and solvation already exist and have been validated against experimental measurements. In this work, we focus on the modeling of the mobility coefficients based on MaxwellStefan setting and incorporate them into the general electrothermodynamic framework. Moreover, we discuss the impact of model parameter on conductivity, transference numbers and salt diffusion coefficient. In particular, the focus is set on the solvation of ions and incomplete dissociation of a nondilute electrolyte. 
J. Fuhrmann, C. Guhlke, Ch. Merdon, A. Linke, R. Müller, Induced charge electroosmotic flow with finite ion size and solvation effects, Electrochimica Acta, 317 (2019), pp. 778785, DOI 10.1016/j.electacta.2019.05.051 .

W. Dreyer, P. Friz, P. Gajewski, C. Guhlke, M. Maurelli, Stochastic manyparticle model for LFP electrodes, Continuum Mechanics and Thermodynamics, 30 (2018), pp. 593628, DOI 10.1007/s0016101806297 .
Abstract
In the framework of nonequilibrium thermodynamics we derive a new model for porous electrodes. The model is applied to LiFePO4 (LFP) electrodes consisting of many LFP particles of nanometer size. The phase transition from a lithiumpoor to a lithiumrich phase within LFP electrodes is controlled by surface fluctuations leading to a system of stochastic differential equations. The model is capable to derive an explicit relation between battery voltage and current that is controlled by thermodynamic state variables. This voltagecurrent relation reveals that in thin LFP electrodes lithium intercalation from the particle surfaces into the LFP particles is the principal rate limiting process. There are only two constant kinetic parameters in the model describing the intercalation rate and the fluctuation strength, respectively. The model correctly predicts several features of LFP electrodes, viz. the phase transition, the observed voltage plateaus, hysteresis and the rate limiting capacity. Moreover we study the impact of both the particle size distribution and the active surface area on the voltagecharge characteristics of the electrode. Finally we carefully discuss the phase transition for varying charging/discharging rates. 
P.É. Druet, Regularity of second derivatives in elliptic transmission problems near an interior regular multiple line of contact, Mathematical Methods in the Applied Sciences, 41 (2018), pp. 64576479, DOI 10.1002/mma.5170 .
Abstract
We investigate the regularity of the weak solution to elliptic transmission problems that involve several materials intersecting at a closed interior line of contact. We prove that local weak solutions possess second order generalized derivatives up to the contact line, mainly exploiting their higher regularity in the direction tangential to the line. Moreover we are thus able to characterize the higher regularity of the gradient and the Hoelder exponent by means of explicit estimates known in the literature for two dimensional problems. They show that strong regularity properties, for instance the integrability of the gradient to a power larger than the space dimension d =3, are to expect if the oscillations of the diffusion coefficient are moderate (that is for far larger a range than what a theory of small perturbations would allow), or if the number of involved materials does not exceed three. 
M. Landstorfer, On the dissociation degree of ionic solutions considering solvation effects, Electrochemistry Communications, 92 (2018), pp. 5659, DOI 10.1016/j.elecom.2018.05.011 .
Abstract
In this work the impact of solvation effects on the dissociation degree of strong electrolytes and salts is discussed. The investigation is based on a thermodynamic model which is capable to predict qualitatively and quantitatively the double layer capacity of various electrolytes. A remarkable relationship between capacity maxima, partial molar volume of ions in solution, and solvation numbers, provides an experimental access to determine the number of solvent molecules bound to a specific ion in solution. This shows that the Stern layer is actually a saturated solution of 1 mol L1 solvated ions, and we point out some fundamental similarities of this state to a saturated bulk solution. Our finding challenges the assumption of complete dissociation, even for moderate electrolyte concentrations, whereby we introduce an undissociated ionpair in solution. We rederive the equilibrium conditions for a twostep dissociation reaction, including solvation effects, which leads to a new relation to determine the dissociation degree. A comparison to Ostwald's dilution law clearly shows the shortcomings when solvation effects are neglected and we emphasize that complete dissociation is questionable beyond 0.5 mol L1 for aqueous, monovalent electrolytes. 
T. Ahnert, A. Münch, B. Niethammer, B. Wagner, Stability of concentrated suspensions under Couette and Poiseuille flow, Journal of Engineering Mathematics, 111 (2018), pp. 5177, DOI 10.1007/s106650189954x .
Abstract
The stability of twodimensional Poiseuille flow and plane Couette flow for concentrated suspensions is investigated. Linear stability analysis of the twophase flow model for both flow geometries shows the existence of a convectively driven instability with increasing growth rates of the unstable modes as the particle volume fraction of the suspension increases. In addition it is shown that there exists a bound for the particle phase viscosity below which the twophase flow model may become illposed as the particle phase approaches its maximum packing fraction. The case of twodimensional Poiseuille flow gives rise to base state solutions that exhibit a jammed and unyielded region, due to shearinduced migration, as the maximum packing fraction is approached. The stability characteristics of the resulting Binghamtype flow is investigated and connections to the stability problem for the related classical Binghamflow problem are discussed. 
T. Ahnert, A. Münch, B. Wagner, Models for the twophase flow of concentrated suspensions, European Journal of Applied Mathematics, 30 (2019), pp. 585617 (published online on 04.06.2018), DOI 10.1017/S095679251800030X .
Abstract
A new twophase model is derived that make use of a constitutive law combining nonBrownian suspension with granular rheology, that was recently proposed by Boyer et al. [PRL, 107(18),188301 (2011)]. It is shown that for the simple channel flow geometry, the stress model naturally exhibits a Bingham type flow property with an unyielded finitesize zone in the center of the channel. As the volume fraction of the solid phase is increased, the various transitions in the flow fields are discussed using phase space methods for a boundary value problem, that is derived from the full model. The predictions of this analysis is then compared to the direct finiteelement numerical solutions of the full model. 
G. Kitavtsev, A. Münch, B. Wagner, Thin film models for an active gel, Proceedings of The Royal Society of London. Series A. Mathematical, Physical and Engineering Sciences, 474 (2018), pp. 20170828/120170828/20, DOI 10.1098/rspa.2017.0828 .

W. Dreyer, C. Guhlke, R. Müller, Bulksurface electrothermodynamics and applications to electrochemistry, Entropy. An International and Interdisciplinary Journal of Entropy and Information Studies, 20 (2018), pp. 939/1939/44, DOI 10.3390/e20120939 .
Abstract
We propose a modeling framework for magnetizable, polarizable, elastic, viscous, heat conducting, reactive mixtures in contact with interfaces. To this end we first introduce bulk and surface balance equations that contain several constitutive quantities. For further modeling the constitutive quantities, we formulate constitutive principles. They are based on an axiomatic introduction of the entropy principle and the postulation of Galilean symmetry. We apply the proposed formalism to derive constitutive relations in a rather abstract setting. For illustration of the developed procedure, we state an explicit isothermal material model for liquid electrolyte metal electrode interfaces in terms of free energy densities in the bulk and on the surface. Finally we give a survey of recent advancements in the understanding of electrochemical interfaces that were based on this model. 
J. Fuhrmann, C. Guhlke, A. Linke, Ch. Merdon, R. Müller, Voronoi finite volumes and pressure robust finite elements for electrolyte models with finite ion sizes, in: Numerical Geometry, Grid Generation and Scientific Computing. Proceedings of the 9th International Conference, NUMGRID 2018 / Voronoi 150, V.A. Garanzha, L. Kamenski, H. Si, eds., 131 of Lecture Notes in Computational Science and Engineering, Springer Nature Switzerland AG, Cham, 2019, pp. 7383, DOI 10.1007/9783030234362 .

O. Klein, On uncertainty quantification for models involving hysteresis operators, in: Extended Abstracts Spring 2018  Singularly Perturbed Systems, Multiscale Phenomena and Hysteresis: Theory and Applications, A. Korobeinikov, M. Caubergh, T. Lázaro, J. Sardanyés, eds., 11 of Research Perspectives CRM Barcelona, Birkhäuser, Cham, 2019, pp. 271275, DOI 10.1007/9783030252618 .

J. Fuhrmann, M. Landstorfer, R. Müller, Modeling polycrystalline electrodeelectrolyte interfaces: The differential capacitance, Preprint no. 2640, WIAS, Berlin, 2019, DOI 10.20347/WIAS.PREPRINT.2640 .
Abstract, PDF (3691 kByte)
We present and analyze a model for polycrystalline electrode surfaces based on an improved continuum model that takes finite ion size and solvation into account. The numerical simulation of finite size facet patterns allows to study two limiting cases: While for facet size diameter $d^facet to 0$ we get the typical capacitance of a spatially homogeneous but possible amorphous or liquid surface, in the limit $L^Debye << d^facet$ , an ensemble of noninteracting single crystal surfaces is approached. Already for moderate size of the facet diameters, the capacitance is remarkably well approximated by the classical approach of adding the single crystal capacities of the contributing facets weighted by their respective surface fraction. As a consequence, the potential of zero charge is not necessarily attained at a local minimum of capacitance, but might be located at a local capacitance maximum instead. Moreover, the results show that surface roughness can be accurately taken into account by multiplication of the ideally flat polycrystalline surface capacitance with a single factor. In particular, we find that the influence of the actual geometry of the facet pattern in negligible and our theory opens the way to a stochastic description of complex real polycrystal surfaces. 
P.É. Druet, Globalintime existence for liquid mixtures subject to a generalised incompressibility constraint, Preprint no. 2622, WIAS, Berlin, 2019, DOI 10.20347/WIAS.PREPRINT.2622 .
Abstract, PDF (510 kByte)
We consider a system of partial differential equations describing diffusive and convective mass transport in a fluid mixture of N > 1 chemical species. A weighted sum of the partial mass densities of the chemical species is assumed to be constant, which expresses the incompressibility of the fluid, while accounting for different reference sizes of the involved molecules. This condition is different from the usual assumption of a constant total mass density, and it leads in particular to a nonsolenoidal velocity field in the NavierStokes equations. In turn, the pressure gradient occurs in the diffusion fluxes, so that the PDEsystem of mass transport equations and momentum balance is fully coupled. Another striking feature of such incompressible mixtures is the algebraic formula connecting the pressure and the densities, which can be exploited to prove a pressure bound in L^{1}. In this paper, we consider incompressible initial states with bounded energy and show the global existence of weak solutions with defect measure. 
M. Landstorfer, A discussion of the reaction rate and the cell voltage of an intercalation electrode during discharge, Preprint no. 2563, WIAS, Berlin, 2018, DOI 10.20347/WIAS.PREPRINT.2563 .
Abstract, PDF (2144 kByte)
In this work we discuss the modeling procedure and validation of a nonporous intercalation halfcell during galvanostatic discharge. The modeling is based on continuum thermodynamics with nonequilibrium processes in the active intercalation particle, the electrolyte, and the common interface where the intercalation reaction occurs. This yields balance equations for the transport of charge and intercalated lithium in the intercalation compound, a surface reaction rate at the interface, and transport equations in the electrolyte for the concentration of lithium ions and the electrostatic potential. An expression for the measured cell voltage is then rigorously derived for a half cell with metallic lithium as counter electrode. The model is then in detail investigated and discussed in terms of scalings of the nonequilibrium parameters, i.e. the diffusion coefficients of the active phase and the electrolyte, conductivity of both phases, and the exchange current density, with numerical solutions of the underlying PDE system. The current density as well as all nonequilibrium parameters are scaled with respect to the 1C current density of the intercalation electrode and the Crate of discharge. Further we derive an expression for the capacity of the intercalation cell, which allows us to compute numerically the cell voltage as function of the capacity and the Crate. Within a hierarchy of approximations of the nonequilibrium processes we provide computations of the cell voltage for various values of the diffusion coefficients, the conductivities and the exchange current density. For the later we provide finally a discussion for possible concentration dependencies and (surface) thermodynamic consistency. 
M.G. Hennessy, A. Münch, B. Wagner, Surface induced phase separation of a swelling hydrogel, Preprint no. 2562, WIAS, Berlin, 2018, DOI 10.20347/WIAS.PREPRINT.2562 .
Abstract, PDF (697 kByte)
We present a formulation of the free boundary problem for a hydrogel that accounts for the interfacial free energy and finite strain due to the large deformation of the polymer network during solvent transport across the free boundary. For the geometry of an initially dry layer fixed at a rigid substrate, our model predicts a phase transition when a critical value of the solvent concentration has been reached near the free boundary. A onedimensional case study shows that depending on the flux rate at the free boundary an initial saturation front is followed by spinodal decomposition of the hydrogel and the formation of an interfacial front that moves through the layer. Moreover, increasing the shear modulus of the elastic network delays or even suppresses phase separation. 
O. Klein, D. Davino, C. Visone, On forward and inverse uncertainty quantification for models involving hysteresis operators, Preprint no. 2561, WIAS, Berlin, 2018, DOI 10.20347/WIAS.PREPRINT.2561 .
Abstract, PDF (1190 kByte)
Parameters within hysteresis operators modeling real world objects have to be identified from measurements and are therefore subject to corresponding errors. To investigate the influence of these errors, the methods of Uncertainty Quantification (UQ) are applied. 
M. Landstorfer, A RedlichKister type free energy model for Liintercalation compounds with variable lattice occupation numbers, Preprint no. 2560, WIAS, Berlin, 2018, DOI 10.20347/WIAS.PREPRINT.2560 .
Abstract, PDF (1667 kByte)
One of the central quantities of a lithium ion intercalation compound is the open circuit potential, the voltage a battery material delivers in thermodynamic equilibrium. This voltage is related to the chemical potential of lithium in the insertion material and in general a nonlinear function of the mole fraction of intercalated lithium. Experimental data shows further that it is specific for various materials. The open circuit voltage is a central ingredient for mathematical models of whole battery cells, which are used to investigate and simulate the charge and discharge behavior and to interpret experimental data on nonequilibrium processes. However, since no overall predictive theoretical method presently exists for the open circuit voltage, it is commonly fitted to experimental data. Simple polynomial fitting approaches are widely used, but they lack any thermodynamic interpretation. More recently systematically and thermodynamically motivated approaches are used to model the open circuit potential. We provide here an explicit free energy density which accounts for variable occupation numbers of Li on the intercalation lattice as well as RedlichKistertype enthalpy contributions. The derived chemical potential is validated by experimental data of Liy(Ni1/3Mn1/3Co1/3)O2 and we show that only two parameters are sufficient to obtain an overall agreement of the nonlinear open circuit potential within the experimental error. 
D. Peschka, M. Thomas, T. Ahnert, A. Münch, B. Wagner, Gradient structures for flows of concentrated suspensions, Preprint no. 2543, WIAS, Berlin, 2018, DOI 10.20347/WIAS.PREPRINT.2543 .
Abstract, PDF (6456 kByte)
In this work we investigate a twophase model for concentrated suspensions. We construct a PDE formulation using a gradient flow structure featuring dissipative coupling between fluid and solid phase as well as different driving forces. Our construction is based on the concept of flow maps that also allows it to account for flows in moving domains with free boundaries. The major difference compared to similar existing approaches is the incorporation of a nonsmooth twohomogeneous term to the dissipation potential, which creates a normal pressure even for pure shear flows 
M. Landstorfer, The dielectric constant of liquid electrolytes obtained from periodic homogenization theory, Preprint no. 2531, WIAS, Berlin, 2018, DOI 10.20347/WIAS.PREPRINT.2531 .
Abstract, PDF (6771 kByte)
The dielectric constant of an electrolytic solution is known to decrease with increasing salt concentration. This effect, frequently called dielectric decrement, is experimentally found for many salts and solvents and shows an almost linear decrease up to a certain salt concentration. However, the actual origin of this concentration dependence is yet unclear, and many different theoretical approaches investigate this effect. Here I present an investigation based on microscopic Maxwell equations and periodic homogenization theory. The microscopic perception of anions and cations forming a pseudo lattice in the liquid solution is exploited by multiscale asymptotic expansions, where the inverse Avogadro number arises as small scaling parameter. This leads to a homogenized Poisson equation on the continuum scale with an effective or homogenized dielectric constant that accounts for microscopic field effects in the pseudo lattice. Incomplete dissociation is further considered at higher salt concentrations due to solvation effects. The numerically computed homogenized dielectric constant is then compared to experimental data of NaCl and shows a remarkable qualitative and quantitative agreement in the concentration range of (0  5)mol L. 
J. Fuhrmann, C. Guhlke, B. Matejczyk, R. Müller, Transport of solvated ions in nanopores: Asymptotic models and numerical study, Preprint no. 2526, WIAS, Berlin, 2018, DOI 10.20347/WIAS.PREPRINT.2526 .
Abstract, PDF (1233 kByte)
Improved PoissonNernstPlanck systems taking into account finite ion size and solvation effects provide a more accurate model of electric double layers compared to the classical setting. We introduce and discuss several variants of such improved models. %Based on spatially fully resolved numerical models We study the effect of improved modeling in large aspect ratio nanopores. Moreover, we derive approximate asymptotic models for the improved PoissonNernstPlanck systems which can be reduced to onedimensional systems. In a numerical study, we compare simulation results obtained from solution of the asymptotic 1Dmodels with those obtained by discretization of the full resolution models. 
J. Fuhrmann, C. Guhlke, A. Linke, Ch. Merdon, R. Müller, Models and numerical methods for electrolyte flows, Preprint no. 2525, WIAS, Berlin, 2018, DOI 10.20347/WIAS.PREPRINT.2525 .
Abstract, PDF (1807 kByte)
The most common mathematical models for electrolyte flows are based on the dilute solution assumption, leading to a coupled system of the NernstPlanckPoisson driftdiffusion equations for ion transport and the Stokes resp. NavierStokes equations for fluid flow. This contribution discusses historical and recent model developments beyond the dilute solution assumption and focuses on the effects of finite ion sizes and solvation. A novel numerical solution approach is presented and verified here which aims at preserving on the discrete level consistency with basic thermodynamic principles and structural properties like independence of flow velocities from gradient contributions to external forces. 
P.É. Druet, Analysis of mass transfer, NavierStokes equations for multicomponent fluids subject to a volume constraint, 5th Applied Mathematics Münster Symposium: Transport, Mixing and Fluids, February 11  13, 2019, Westfälische WilhelmsUniversität Münster, February 12, 2019.

P.É. Druet, Multicomponent diffusion in fluids: Some mathematical aspects, Technische Universität Wien, Institut für Analysis und Scientific Computing, Austria, April 3, 2019.

P.É. Druet, The low Mach number limit for complex fluids: Recent results on strong and weak solvability, PDE 2019: Partial Differential Equations in Fluids and Solids, September 9  13, 2019, WIAS, Berlin, September 9, 2019.

P.É. Druet, Weak solution analysis for incompressible multicomponent flow models, Berliner Oberseminar Nichtlineare partielle Differentialgleichungen (LangenbachSeminar), WIAS, Berlin, July 3, 2019.

M. Landstorfer, Mathematical modeling of intercalation batteries with nonequilibrium thermodynamics and homogenization theory, ModVal 2019  16th Symposium on Modeling and Experimental Validation of Electrochemical Energy Technologies, Braunschweig, March 12  13, 2019.

M. Landstorfer, Modelling porous intercalation electrodes with continuum thermodynamics and multiscale asymptotics, Oxford Battery Modelling Symposium, March 18  19, 2019, Pembroke College, University of Oxford, UK, March 18, 2019.

M. Landstorfer, Theory and validation of the electrochemical double layer, PC Seminar der AG Prof. Baltruschat, Universität Bonn, Abt. Elektrochemie, March 8, 2019.

R. Müller, Transport of solvated ions in nanopores: Modeling, asymptotics and simulation, Conference to celebrate the 80th jubilee of Miroslav Grmela, May 18  19, 2019, Czech Technical University, Faculty of Nuclear Sciences and Physical Engineering, Prag, Czech Republic, May 18, 2019.

R. Müller, Transport phenomena in electrolyte within a battery cell, Battery Colloquium, Technische Universität Berlin, April 18, 2019.

A. Münch, B. Wagner, Nonlinear viscoelastic effects of polymer and hydrogel layers sliding on liquid substrates, 694. WEHeraeusSeminar, Bad Honnef, April 11  13, 2019.

B. Wagner, S. Reber, J. Iglesias, A. Fritsch, E. Meca, Hierarchical spindle assembly: Sequencedependent energy landscapes for a cytoplasmic condensate, KickOff Meeting DFG SPP 2191 ``Molecular Mechanisms of Functional Phase Separation'', Heidelberg, June 6  7, 2019.

B. Wagner, Free boundary problems of active and driven hydrogels, PIMSGermany Workshop on Modelling, Analysis and Numerical Analysis of PDEs for Applications, June 24  26, 2019, Universität Heidelberg, Interdisciplinary Center for Scientifiv Computing (IWR) and BIOQUANT Center, June 24, 2019.

B. Wagner, Free boundary problems of active and driven hydrogels, EUROMECH 604, Fluid and Solid Mechanics for Issue Engineering, September 23  25, 2019, University of Oxford, Mathematical Institute, UK, September 24, 2019.

B. Wagner, Illposedness of twophase flow models of concentrated suspensions, International Congress on Industrial and Applied Mathematics ICIAM2019, Minisymposium MS ME07 6 Recent advances in understanding suspensions and granular media flow  Part 2 of 2, July 15  19, 2019, Valencia, Spain, July 17, 2019.

B. Wagner, Mathematical modeling of real world processes, CERN Academic Training Programme 20182019, March 14  15, 2019, CERN, Genf, Switzerland.

J. Fuhrmann, A. Linke, Ch. Merdon, R. Müller, Induced charge electroosmotic flow including finite ion size effects, 13th International Symposium on Electrokinetics (ELKIN), Cambridge, USA, June 12  14, 2019.

O. Klein, On uncertainty quantification for models involving hysteresis effects, Seminar Nichtlineare Optimierung und Inverse Probleme, WIAS, Berlin, May 21, 2019.

P.É. Druet, Analysis of mass transfer, NavierStokes equations for multicomponent fluids subject to a volume constraint, Berliner Oberseminar ``Nichtlineare partielle Differentialgleichungen'' (LangenbachSeminar), WIAS, Berlin, November 28, 2018.

P.É. Druet, Introduction to the DFGProject: Analysis of improved NernstPlanckPoisson models for incompressible electrolytes, WIAS Days 2018, February 22  23, 2018, Berlin, February 23, 2018.

M. Landstorfer, Continuum thermodynamic modelling of electrolytes, BMBF Kickoff Meeting LuCaMag, Bonn, November 7, 2018.

M. Landstorfer, Homogenization methods for electrochemical systems, Workshop ``Numerical Optimization of the PEM Fuel Cell Bipolar Plate'', Zentrum für Solarenergie und WasserstoffForschung (ZSW), Ulm, March 20, 2018.

M. Landstorfer, Modeling and simulation of porous battery electrodes with multiscale homogenization techniques, 69th Annual Meeting of the International Society of Electrochmistry (ISE), September 2  7, 2018, Bologna, Italy, September 6, 2018.

M. Landstorfer, Modellbasierte Abschätzung der Lebensdauer von gealterten LiBatterien für die 2ndLife Anwendung als stationärer Stromspeicher, BMBFStatusseminar zur Förderrichtlinie Mathematik, Bonn, November 19  20, 2018.

M. Landstorfer, Modellbasierte Abschätzung der Lebensdauer von gealterten LiBatterien für die 2ndLife Anwendung als stationärer Stromspeicher, BMBFStatusseminar zur Förderrichtlinie Mathematik, November 19  20, 2018, Bonn, November 20, 2018.

M. Landstorfer, Modellierung und Upscaling, WIAS (AG 4), BMBF Workshop zu MaLLi2, November 12  13, 2018, Ellwangen, November 12, 2018.

M. Landstorfer, Modelling and simulation of porous battery electrodes with multiscale homogenisation techniques, 6th European Conference on Computational Mechanics, 7th European Conference on Computational Fluid Dynamics (ECCMECFD 2018), June 11  15, 2018, Glasgow, UK, June 14, 2018.

M. Landstorfer, Modelling and simulation of porous battery electrodes with multiscale homogenisation techniques, Solid State Electrochemistry Symposium, November 12  14, 2018, HelmutSchmidtUniversität, Hamburg, November 13, 2018.

M. Landstorfer, Modelling and simulation of porous electrodes with multiscale homogenization technique, ModVal 2018, 15th Symposium on Modeling and Experimental Validation of Electrochemical Energy Devices, Aarau, Switzerland, April 12  13, 2018.

M. Landstorfer, Modelling battery electrodes with homogenization techniques, KickOffMeeting zu BMBFProjekt MALLi^2, Universität Ulm, March 21, 2018.

M. Landstorfer, Thermodynamic modeling of electrolytes and their boundary conditions to electrodes, AMaSiS 2018: Applied Mathematics and Simulation for Semiconductors, October 8  10, 2018, WIAS, Berlin, October 9, 2018.

R. Müller, J. Fuhrmann, C. Guhlke, B. Matejczyk , Dimension reduction of improved NernstPlanck models for charged nanopores, Asymptotic Behavior of Systems of PDE Arising in Physics and Biology: Theoretical and Numerical Points of View (ABPDE III), Lille, France, August 28  31, 2018.

R. Müller, Dynamics of electrochemical interfaces, Asymptotic Behavior of Systems of PDE arising in Physics and Biology: Theoretical and Numerical Points of View (ABPDE III), August 28  31, 2018, Université de Lille I, France, August 30, 2018.

R. Müller, Modeling and simulation of electrolyte transport in nanopores, Center for Computational Engineering, RheinischWestfälische Technische Hochschule Aachen, May 8, 2018.

M. Thomas, D. Peschka, B. Wagner, V. Mehrmann, M. Rosenau, Modeling and analysis of suspension flows, MATH+ Center Days 2018, October 31  November 2, 2018, ZuseInstitut Berlin (ZIB), Berlin, October 31, 2018.

B. Wagner, Modeling microstructures for light harvesting surfaces, The 20th European Conference on Mathematics for Industry (ECMI 2018), Minisymposium 38 ``ECMI Special Interest Group: Material Design and Performance in Sustainable Energies'', June 18  22, 2018, Budapest, Hungary, June 21, 2018.

B. Wagner, Modeling microstructures for light harvesting surfaces, European Women in Mathematics (EWM) General Meeting 2018, Minisymposium ``Mathematics in Industry'', KarlFranzensUniversität Graz, Austria, September 7, 2018.

B. Wagner, Modelling, aymptotic analysis and numerical simulation of thinfilm dynamics on solid and liquid substrates, Workshop ``Dynamic Wetting of Flexible, Adaptive and Switchable Substrates'', May 16  18, 2018, Universität Münster, Center for Nonlinear Sciences, May 17, 2018.

B. Wagner, Multiscale problems of material design in sustainable energies, SIAM Conference on Nonlinear Waves and Coherent Structures, June 11  14, 2018, Anaheim, USA, June 13, 2018.

B. Wagner, Multiple scales in thin liquid films, UCLA Guest Lecture, University of California, Department of Mathematics, Los Angeles, USA, January 25, 2018.

B. Wagner, Multiscale modelling of suspensions and how it fits into the UL context, University of Limerick, Department Mathematics & Statistics, Ireland, June 7, 2018.

B. Wagner, Signatures of slip in thin film flows, SIAM Conference on Nonlinear Waves and Coherent Structures, Minisymposium MS25 ``Largescale Effects of Local Structures in Complex Systems'', June 11  14, 2018, Anaheim, USA, June 13, 2018.

B. Wagner, Thin film models for an active gel, 89th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2018), Session S02 ``Biomechanics'', March 19  23, 2018, Technische Universität München, March 22, 2018.

B. Wagner, Yield stress in concentrated suspensions, Mathematical Nanosystems Workshop, January 17  18, 2018, California NanoSystems Institute at UCLA, Los Angeles, USA, January 18, 2018.

J. Fuhrmann, A. Linke, Ch. Merdon, C. Guhlke, R. Müller, Models and numerical methods for electroosmotic flow including finite ion size effects, Workshop on Ion Exchange Membranes for Energy Applications (EMEA2018), Bad Zwischenahn, June 26  28, 2018.

J. Fuhrmann, A. Linke, Ch. Merdon, C. Guhlke, R. Müller, Models and numerical methods for electroosmotic flow including finite ion size effects, Applied Mathematics and Simulation for Semiconductors (AMaSiS 2018), WIAS Berlin, October 8  10, 2018.

O. Klein, On uncertainty quantification for models involving hysteresis operators, MURPHYSHSFS2018: Interdisciplinary Workshop on Multiple Scale Systems, Systems with Hysteresis and Trends in Dynamical Systems, May 28  June 1, 2018, Centre de Recerca Matemàtica (CRM), Barcelona, Spain, May 31, 2018.

J. Fuhrmann, C. Guhlke, Ch. Mehrdon, A. Linke, R. Müller, Induced charge electroosmotic flow with finite ion size and solvation effects, Preprint no. arXiv:1901.06941, Cornell University, 2019, DOI 10.1016/j.electacta.2019.05.051 .
Articles in Refereed Journals
Contributions to Collected Editions
Preprints, Reports, Technical Reports
Talks, Poster
External Preprints
Research Groups
 Partial Differential Equations
 Laser Dynamics
 Numerical Mathematics and Scientific Computing
 Nonlinear Optimization and Inverse Problems
 Interacting Random Systems
 Stochastic Algorithms and Nonparametric Statistics
 Thermodynamic Modeling and Analysis of Phase Transitions
 Nonsmooth Variational Problems and Operator Equations